The Forza OX-525 is the latest instrument available from Forza International to perform the testing and analysis of fuel samples incompliance with the ASTM D525 test method. Also known as the Oxidation Stability of Gasolines by the Induction Method.
The Oxy Plus is developed to ensure the reliability and performance of the instrument over the long term, with a strong insistence on safety. With core technology being the heated metal block, Forza has integrated world class technology to ensure temperature is held within +/-0.1 Deg C of the user inputed temperature, which complies with ASTM D525. Layered on top of the technology are both hardware and software based safety features, like an automatic shut-off when temperature exceeds a certain limit.

FLOW-D97 is a Single Position Automated Pour Point Analyzer conforms to method ASTM D97 by Automated Tilting. Movement of the sample is detected by non-contact sensor. If movement is not detected, the bath is lowered to the next lower temperature to repeat the test. All operations are controlled via a 10″windows touch panel, which displays sample, bath, and the pour point result temp. After the test the user can easily export test data to flash drive or print it from machine with an external printer. The software logs complete testing history.

Forza CPC-D97-B-X is a optional 2, 3 and 4 position refrigerated apparatus (Dry Bath) for the cold flow properties analysis- Cloud, Pour Point and CFPP confirm to methods ASTM D97, ASTM D2500, ASTM D6371.

Forza CPC-D97-B-X is a optional 2, 3 and 4 position refrigerated apparatus (Dry Bath) for the cold flow properties analysis- Cloud, Pour Point and CFPP confirm to methods ASTM D97, ASTM D2500, ASTM D6371.

FLOW – D2386 is a single position Automated Freeze Point Analyzer. Accurate and Precise Freezing Point Determination exactly as per the ASTM D2386 Which considered as a referee method globally in case of any dispute. The unit have Optical detection of freezing point and also have automated Stirring mechanism for moving the wound wire stirrer as per the D2386 method. After the test the user can easily export test data to flash drive or print tests from machine with an external printer. The software logs complete testing history.

The FORZA OxiPlus is a high temperature Individual tube heater oxidation apparatus specially designed to perform the Oxidation Stability of Fuels and Lubricants.
FORZA Heated Tube Apparatus also have the option of Mass Flow Controller arrangement along with the traditional float in – tube flow meter (Rotameter). Rotameter are typically affected by upstream and downstream pressure changes and will need tweaking almost once a day to maintain proper flow during a long – term test. But the Mass Flow Controller (MFC) will provide a rock steady flow rate all time Individual Tube heater Apparatus eliminate the need for expensive and hazardous bath mediums, which benefits laboratory safety, health, environmental, and maintenance issues plus tighter temperature stability, and the ability to operate each test position individually and at same temperature as well as different temperature as desired by the client which saves energy.

The FORZA OxiPlus is a high temperature Individual tube heater oxidation apparatus specially designed to perform the Oxidation Stability of Fuels and Lubricants.
FORZA Heated Tube Apparatus also have the option of Mass Flow Controller arrangement along with the traditional float in – tube flow meter (Rotameter). Rotameter are typically affected by upstream and downstream pressure changes and will need tweaking almost once a day to maintain proper flow during a long – term test. But the Mass Flow Controller (MFC) will provide a rock steady flow rate all time Individual Tube heater Apparatus.

Manual Test Apparatus for Copper Strip Corrosion Test–ASTM D130|ASTM D4048 Stainless Steel Liquid (Oil) Bath for both Pressure Vessel & test tube Procedures

Manual Test Apparatus for Silver Strip Corrosion Test-IP227 and Related Methods. Stainless Steel Liquid (Oil) Bath

The FORZA HTKV-D445-L-4 is a High temperature SEVEN test position bath specially designed to perform kinematic viscosity tests between +40 degC and +150 degC.
Forza Visco Plus Series of test equipment are software – driven manual viscosity baths, designed to be compliant with ASTM D445 Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity). Though not an automatic viscosity bath, Forza has developed advanced software to significantly reduce the pain points that come with performing the viscosity tests. The HTKV units come witha7-inch, high resolution touch screen. The timers that are required to run ASTM D445 are integrated within the software.

The FORZA LTKV-D445-L-4 is a low temperature FOUR test position bath specially designed to perform kinematic viscosity tests between +15degC and -25degC. The FORZA ULTKV-D445-L-4 is an ultra-low temperature FOUR test position bath specially designed to perform kinematic viscosity tests between +15deg C and -69degC. (This ULTKV Bath can also be used for ASTM D2386 –Manual Freezing Point with an additional stirring mechanism module.)

Forza has come up with an efficient design of a modular apparatus. This modular apparatus is a one-test position unit fully equipped to run the test. Firstly, this unit uses air as the bath medium. It does not have the unsafe and messy liquid bath medium of traditional baths. Further in this case the question of cross contamination of the test samples with silicon oil bath medium is eliminated. The cabinet is sturdy and well insulated with good visibility through a high temperature scratch proof glass viewing window in the front. The proprietary heating system is state of the art and microprocessor based with a touch panel interface. A high temperature limit is provided for safety, The Forza unit also has a mass flow controller which is far more accurate than rotameters which are susceptible to the changes of upstream and downstream pressure. In a mass flow controller the air delivery to the diffuser stone is repeatable and accurate irrespective of pressure or temperature changes. A mass flow based totalizer is also provided to monitor exit air as recommended by the test method. This modular unit has a small foot print.

Sample stirrer motor’s horizontal position is fixed while vertical elevating motion is allowed. This allows repeatable concentric positioning with sample tubes, which is critical. Special turn table with lock pin mechanism enhances concentricity. Minimized length of motor shaft prevents run out. The buffed and polished paddle is machined from a single piece of stainless stock and not welded. This eliminates contamination in crevices and there by eliminates erroneous results. The unit is protected from low liquid level safety float switch. Also provided is a high temperature limit to prevent unit from achieving temperatures higher than desired. The unit is provided with 7pcs of WS-1401-D disposable graduated test tubes.

Forza Visco Plus Series of test equipment are software driven low temperature viscosity baths, designed to be compliant with ASTM D2983 for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer. The turn table holds 10 test samples. After the 16 hours conditioning time, the turn table is manually rotated until the proper test cell is under the viscometer. The spindle is connected while the sample is still in the liquid bath. This allows the measurement of viscosity without removing the sample from the temperature controlled environment. Far superior viscosity data repeatability is obtained using this procedure as opposed to the air chamber procedure.

FORZA Heated Tube Apparatus also have the option of Mass Flow Controller arrangement along with the traditional float in-tube flow meter (Rotameter). Rotameters are typically affected by upstream and downstream pressure changes and will need tweaking almost once a day to maintain proper flow during a long-term test. But the Mass Flow Controller (MFC) will provide a rock steady flow rate all time Individual Tube heater Apparatus eliminate the need for expensive and hazardous bath mediums, which benefits laboratory safety, health, environmental, and maintenance issues plus tighter temperature stability, and the ability to operate each test position individually and at same temperature as well as different temperature as desired by the client which saves energy.